The strip material is cut in the shape of a disc mounted on a pre-assembled shaft.

They are particularly suitable for cleaning weld beads without removing any material and without weakening the work piece. These wheels on a pre-assembled shaft don't r

Strip material is cut in the shape of a disc with a hole in the center to be fitted individually or in pairs on suitable fixing shafts.

It is more rigid, resistant when used on sharp angled or irregular surfaces and has a faster cut.

Designed for more aggressive material removal.
Cleaning welds, removing corrosion, rust, and scaling.
Removing paints, varnishes and sealants from difficult to reach surfaces.
Blending
Rapid removal of surface contaminants.

Wheels are constructed with alternating flaps of non-woven and coated abrasive aluminum oxide material. High rate of cut, while providing a uniform scratch pattern.

Non-woven flap wheel with shaft is soft and conformable. The non-woven material allows removing surface contaminants without eliminating critical detail or gouging the work piece.

Applications requiring maximum benefits of conformability and finishing rate. Provides fine surface finish. Best used for finishing flat surfaces and deburring and cleaning inner diameters and contoured surfaces.

Blending, finishing and cleaning on

Dust-free sanding and better working enviroment.

High efficiency to eliminate the surface of agglomeration

Compared to paper backing, the polyster film backing material creats a more flexible and much smoother abrasive surface.

It can finish quickly and lasts long because of excellent resistance to clogging.

stone, chipboard, plastic, marble, veneers, non-ferrous, wooden floors.